Multiple Archives - Voipo Review - The Best of Voice Over IP (VOIP)

Wilson Electronics Desktop Adjustable Gain Cell Phone Signal Booster for Home or Office – For Multiple Users

Signal booster improves cellular signal for both voice and data rates in small area
Boosts your cell phone’s signal by more than 15 times
Completely wireless; requires no physical connection to your cell phone
Compatible with 800/1,900 MHz frequencies for all US and Canadian cellular providers (except iDen/Nextel/MIKE)
Comes with 30-day money-back guarantee and 1-year manufacturer’s warranty
Physical Characteristics-Dimensions-6.2″ Height x 4.2″ Width x 1.5″ Depth: Physical Characteristics-Weight (Approximate)-10.24 oz.:
Technical Information-Frequency Range-824 MHz to 1990 MHz: Technical Information-Network Supported-CDMA, TDMA, GSM:Technical Information-Maximum Gain-50 dB: Interfaces/Ports-Interfaces/Ports-TNC Female Antenna, F Female Antenna:

IMPROVES CELLULAR PHONE & CELLULAR-BASED DATA CARD PERFORMANCE IN THE HOME OR OFFICE ANYWHERE A STRONGER CELLULAR SIGNAL IS NEEDED INDOORSGREATLY REDUCES DROPPED CALLS & INCREASES THE PHONE’S BATTERY LIFESUPPORTS MULTIPLE PHONES & CELLULAR-BASED DATA CARD USERS SIMULTANEOUSLYWORKS WITH ALL CELLULAR PHONES & ALL US-BASED CARRIERS EXCEPT IDEN/NEXTELINCLUDES EVERYTHING NEEDED TO IMPROVE SIGNAL IN ANY ROOM OF THE HOME OR OFFICE & AC POWER SUPPLYUP TO 500 SQ FT COVERAGE AREAUPC : 813986006436Shipping Dimensions : 18.75in X 14.00in X 4.75inEstimated Shipping Weight : 7.5113Designed to give the best results when used in a single room, the Wilson Electronics Desktop (DT) Cell Phone Signal Booster increases your cell phone’s signal by more than 15 times. It significantly improves your cell phone’s overall performance by minimizing dropped calls, increasing data rates, and letting you enjoy clearer reception, making the Wilson DT the ideal solution in an office or at home.

DT Desktop Cell Phone
Signal Booster
At a Glance:

Boosts cell phone signal by more than 15x in your home
Fewer dropped calls; faster data rates
Easy installation with mounting hardware included
Supports CDMA, TDMA, GSM and AMPS cell phone technologies
Made in the USA

Multiple mounting options ensure you’ll get the best possible signal. View larger.

The Wilson Electronics Desktop (DT) cell phone signal Booster. View larger.

It’s All About Power
The primary cause of dropped calls is low signal output power from the cell phone to the cell tower, which limits the phone’s ability to communicate with the tower. A typical cell phone provides merely one-fifth of a watt of output power. To address this problem, the amplifier and the outside antenna work together to increase the phone’s output power by more than 15 times over using just the phone alone.

Enjoy Premium Reception and Fewer Dropped Calls
If you have to go to the window or outside to be able to use your cell phone, you know the frustration of weak cell phone signal reception. Using state-of-the-art technology, the Wilson DT amplifies the signal both to and from the cell tower, increasing the power to penetrate through natural or man-made obstructions, thus enabling you to communicate where you were unable to before.

The Wilson DT comes with a compact signal booster that fits neatly on your desk or small table, and it works best when placed in the room where you’re experiencing problems with reception.

Included Hardware for Multiple Mounting Options
The Wilson DT is connected via a coaxial cable to the outside antenna, which performs best when mounted outside of the building and pointed towards the nearest cell tower. The antenna may also be mounted on a window (again, best when aimed at the nearest cell tower), or on an outside wall; however, some performance may be lost.

Once installed, the Wilson DT enhances the signal of multiple cell phones and data cards near the device. The result is that you will experience fewer dropped calls, clearer call quality, and improved data rates–even with 3G technologies.

Compatible with Most Cell Phone Models and Providers
The Wilson DT is compatible with all US and Canadian cellular providers, excluding iDEN, Nextel, and MIKE. Also, it supports CDMA, TDMA, GSM, and AMPS cell phone technologies, as well as data protocols such as GPRS, 1xRTT, HSDPA, EVDO, and EDGE. The use of radio distribution equipment that enhances, extends or amplifies a wireless signal may be prohibited without the consent of the wireless carrier upon whose network such equipment will be used. You should consult with your carrier before purchasing such equipment to use with that carrier’s service.

The Wilson DT Signal Booster includes a 30-day money-back guarantee and is backed by a one-year manufacturer’s warranty.

Specifications

Frequency: 824-894 MHz / 1850-1990 MHz
Amplifier Gain: 56dB / 56dB
System Gain: 62dB
Max Output Power: 1.3 watts
Max RF (downlink): +9.5dBm
Noise Figure: 3.5dB nominal
Flatness: ±5dB
Isolation: > 90dB
Power Requirements: 120-240V AC, 50-60 Hz, 8W
Connectors: TNC Female / F-Female
Dimensions: 6.2 x 4.2 x 1.5 (inches)
Weight: 0.64 lbs

What’s in the Box
Includes everything you need for a full installation DT amplifier, on-board antenna, outside antenna, coaxial cables (20 feet and 30 feet), cable connector, wall bracket, mounting hardware for pole, wall or window mount, and AC power supply.


The Wilson DT is ideal for improving you cell phone signal and data rates in a single room.	Everything you need for better reception is included in the box. View larger.