Making The Transition To VoIP
Telecommunications technology is getting more complex by the minute, that’s why it’s no surprise that VoIP becomes the better choice these days. It is cheaper, more practical and, with the right tools with you, you can practically take it everywhere. You just need the right network access for it. If you have good connections for VoIP, it’s time to think of making the transition to it and use it as your main telecommunications service. Here are some guidelines.
First, you must have the basics. That would involve a high speed internet connection, VoIP gear, and a public telephone number. A computer with speakers and a microphone will suffice. Certainly, getting a SIP phone or using an ATA (analog telephone adapter) with your analog phone is a better choice. You must have at least DSL for an Internet connection. Bigger bandwidth, better. This hold particularly true when it comes to businesses.
Then, you must transfer your Direct Inward Dialing (DID) number. What is DID, you may ask. It is the publicly accessible number given to you by your local phone company. For home VoIP, the VoIP service provider will do such transfer. For businesses, on the other hand, particularly those with different DIDs, a company technician must coordinate with the phone company.
Afterwards, set up appropriate hardware and software. Single-user accounts, like most residential accounts, will be fine with just a softphone software for their computer systems, a SIP phone or an ATA unit for their analog phone. Businesses require much more, like temporarily going for a gateway with their legacy PBX system, or getting a new IP-PBX. Over the long haul, an IP-PBX will speed up the implementation of convergent communications within the organization.
It’s time for the usual problems faced by most VoIP users. First is the power source. In emergency power outages, you must still be in contact with family, friends and clients. Residential users can have their calls rerouted to their mobile phones in the event of these outages. On the other hand, businesses can have calls transferred to backup analog phone numbers.
VoIP service monitoring is also of the essence. This is possible via third party companies. Single line residential accounts can go for single endpoint monitoring. It’s typically free of charge. Multiple endpoints, though, have paid options.
You must see to it that you get consistent, reliable quality service. When you constantly monitor your VoIP quality, this is possible. Any issues that would arise could be remedied by you or your service provider.
Categories: VOIP Articles Tags: Business Voip, company, possible, residential, residential voip, time, VOIP
Is it possible to build a wireless voip modem/router?
Question by crbon: Is it possible to build a wireless voip modem/router?
I was wondering instead of buying a wireless router/modem that supports voip can i build my own from eg. a mini itx board or something simmilar? If it is possible, will it be really expensive? Thanks in advance.
Best answer:
Answer by moe fough
First, have you considered 3rd party software for your hardware router? check out dd-wrt or tomato (from Polar Cloud) if you haven’t. I know DD-WRT supports some type of VoIP and there might even be a VoIP distro.
If you have already looked at this option and want to turn a PC into a solution:
Modem- No. (very unlikely). Typically ISPs have to communicate with their own equipment to allow access. You might be able to mac address clone and get away with this but I really wouldn’t do that because you could get in trouble/banned from an ISP.
Router/WIFI/VoIP/Firewall/Server/Proxy/DNS/etc. – Absolutely.
Check out Trixbox (trixbox dot org), which is an Astrisk based PBX VoIP, router, firewall, etc solution. You can configure it to distribute local WiFi with a card you have installed in your PC; however, driver support is sketchy when it comes to anything that isn’t Linksys/D-Link/Netgear (namebrand) so if you have a very generic card, make sure it’s compatible first.
Also, check out M0n0Wall or really- just google Linux or BSD router solutions and you’ll get a lot of results an options.
In any case, you don’t need to be a pro to get these to work, but you should at least be a little familiar with Linux/BSD command line stuff.
What do you think? Answer below!
Categories: VOIP Questions Tags: build, modem/router, possible, VOIP, wireless
Is it possible to wire a VoIP adapter to all the landlines in the house?
Question by I Like Men: Is it possible to wire a VoIP adapter to all the landlines in the house?
If I disconnect the wires that lead into the house from the POTS terminal outside, they will have no input. Then can I connect the output jack on the back of my VoIP router to any landline jack in my house to have VoIP to every landline jack?
Best answer:
Answer by Mr. VoIP
Yes, you can do that if your Internet is provided over cable TV line.
Obviously, you could not do that if you have DSL Internet because the DSL Internet comes in on the external telephone line.
Add your own answer in the comments!
Is it possible to make voip calls through a mobile?
Question by will h: Is it possible to make voip calls through a mobile?
Just wondering, whether it is possible for me to make voip calls that go through my mobile and charge my mobile, then out. Just because I have no signal at home.
Just wondering whether it is possible to make voip calls on my voip phone that charge my mobile phone.
Best answer:
Answer by tazzy_2207
If you can find a download of Skype or other application that does the same thing that is compatible with your phone, then sure. Have a look here http://www.getjar.com and see if they have anything for your phone.
Know better? Leave your own answer in the comments!