Seeking Help From an Electrician to Install a Physical VoIP Set Up

VoIP stands for Voice over internet protocol. Phone lines are not being utilized by VoIP, instead the usual standard internet ports on a computer are being used to carry out conversations. Electricians on the ideal setting have to be involved in every step of VoIP installation to make sure that the system will work at its optimum level of functioning alongside having an adequate backup power in the event of power shortage.

Using VoIP has many advantages which include the ability of not using a landline which subsequently reduces the telephone bills of clients and also the ability to make long distance and international calls, which is being regulated by the standard internet data rate. Electricians can be hired to assemble certain instruments or gadgets such as the (ATA) Analog Telephone Adapter that enables a usual telephone to an Ethernet port on a standard LAN router or in most cases broadband routers.

An ATA is a device which is responsible for the conversion of a voice into a digital signal that can then be sent over the internet. A card which is called the interface card containing an ATA is normally being used in order to accept the landline phone cable. This card is then connected to an Ethernet port of a computer. IP phones are known to have its own built in ATA for the conversion of a voice to its digital counterpart. IP phones are usually connected to a computer Ethernet port.

These words and terms may be alien language to people who are not inclined in this field of expertise thus working with IT personnel and electricians is necessary. The only know disadvantage of VoIP is that it is lost when power is off. But certain electricians and IT staff can devise a method that can ensure not only adequate bandwidth but secondary power supply as well.

More Voip Articles